FAQs
Why does the birthing pool come with a disposable liner?
Every person is supplied with a new disposable liner to give them peace of mind that they are about to give birth in a sterile environment. The pool is not to be used without one. The liner is held in place securely by the handles at each end of the pool.
How heavy is the pool when filled with water?
Weight when filled with water: 650 kgs
Weight including mother: Approximately 730-770 kgs.
Equivalent number of adults: 10-13.
A solid floor is preferable, or putting the pool in the corner of the room with joists that are rot-free, where there is more support. We cannot guarantee that your floor will support the weight of the birth pool. You may want to get a free inspection of your joists from a wood preservation company, particularly if your house is old .
Is the birthing pool deep enough for a safe birth?
To give birth in water the depth must be at least 23 inches so that the babies head remains submerged until they are lifted to the surface. This depth is clearly marked on the pool liner as minimum.
How do I get in and out of the pool?
There are two methods of getting in and out of the pool:
Sit on the side and swing legs over.
Step in/out of pool. This flexes the pelvis and can positively affect labour progress.
For either method the handles can be used for support.
The top chamber can be partially deflated to make it easier for women with shorter legs to step over the sides.
How do I keep the water warm?
As you deliver your baby the water needs to be 37 degrees. Midwives are very strict about this and a thermometer is included to help you achieve this. As the pool is not suitable for use with a water heater we suggest you keep one hose connected to your tap so that you can introduce more hot water. It may also be necessary to remove some water using the submersible pump if you are close to reaching the maximum marker on the liner. This can be done at the same time as you will be provided with two hoses. It also ensures that the water is clean and fresh for your baby's delivery.
Why do you not supply heat retaining covers?
Because from experience we know that you will not want the water to be 37 degrees when you first enter the pool.
How do I empty the pool?
Use the strainer to remove any debris from the water then simply use the submersible pump provided to empty the water down the toilet or drain.
Full instructions will be provided with the pool and accessories.
How are the pools cleaned after use?
The pools and accessories are first cleaned using a Chlorine solution. They are then sterilised using a solution with the same ingredients as Milton.
Can't find what you're looking forward? Call Emma on 01707 373 468 or 07543 821687.
You can also email Emma@waterbabybirthingpoolhire.co.uk
